Formatting a multimediacard, Installing a multimediacard – Aiwa MM-RX400 User Manual

Page 14

Advertising
background image

14

ENGLISH

Formatting a
MultiMediaCard

In order to use a MultiMediaCard with an
MM-RX400 player, you must initialize it to
MM-RX400 format using the format
function of the supplied Audio Manager.
For details on formatting a
MultiMediaCard, see “Formatting the
internal Flash Memory and
MultiMediaCard” (page 46).

Note on the MultiMediaCard

• Insert the MultiMediaCard completely

into the slot to ensure that it is recognized
by Audio Manager.

• NEVER remove the MultiMediaCard

from the MM-RX400 player while Audio
Manager is formatting it or transferring
music files to the MM-RX400 player.
Doing so may cause not only the
computer to freeze up but also the
memory media to be damaged.

• Music files on the MultiMediaCard

cannot be played back with another
player.

• A MultiMediaCard that has been used

with other players that employs a format
different from Windows (DOS-
compatible) format cannot be used by
the MM-RX400 player even after
formatting it with Audio Manager.

Installing a MultiMediaCard

You can use the 32MB MultiMediaCard
that comes with the MM-RX400 player.
Before you purchase an additional
MultiMediaCard, it is recommended to
contact your nearest AIWA service
personnel to find out which kind that works
best with your MM-RX400 player.
Before installing or removing a
MultiMediaCard, be sure to turn off the
MM-RX400 player and disconnect the
USB cable from it.

1

Remove the battery compartment

cover (page 13).

2

Insert the MultiMediaCard into the

slot in the correct direction,
holding it with the beveled corner
to the right.

The mark printed on the player over
the slot indicates the correct orientation
of the card.

3

Replace the battery compartment

cover.

To remove the MultiMediaCard

First push the MultiMediaCard in slightly
to release it.

PREPARATION

Advertising