Aiwa MM-RX400 - Manual (Page 25)

ENGLISH
25
ENGLISH
3 Click on the “ read a cd” button
to open the Read a CD window.
The Read a CD window appears with
all the tracks on the music CD checked
for recording.
If you did not check the “Always get
title from CDDB when CD is inserted”
option mentioned above, the dialog
box appears and prompts you to obtain
information about the inserted music
CD automatically. Now, click on “No”
so you can edit information manually.
If you want to record the entire music
CD into your computer, skip steps 4
and 5, and go to step 6.
4 Click on the “Untag All” button to
clear the check marks for all the
tracks on the “Read a CD Track”
list.
5 Select the tracks that you want to
record into your computer by
clicking on the box to the left of
each track.
To cancel the selection, click on the
box again.
Tip
If you are not sure that the track you
selected is correct, right-click on the
track, then select “Play” from the drop-
down menu to hear it.
6 Edit track information.
1 Click on the “Edit Track Info” button.
The “Preview Playlist” window
appears.
2 Select the track that you want to
edit, then click on the “Review/
Edit” button.
The “Edit CD Track Information”
dialog box appears.