Aiwa MM-RX400 - Manual (Page 42)

42
ENGLISH
USING AUDIO MANAGER
7 Portable Track List button bar
button
Click on this button to redisplay the
Portable Track List to match the
contents of the selected memory
media.
button
Click on this button to display information
about restrictions on transferring music
files to the MM-RX400 player.
button
Click on this button to initialize the
memory media (internal and external)
on the MM-RX400 player.
You can usefully use this button when
you want to delete all the tracks from
the memory media.
button
Click on the trash can to delete the
selected track from the Portable Track
List. Note that this causes the track not
only to disappear from the list but also
to be deleted from the memory media.
button
Click on this button to move a selected
track up in the Portable Track List
order.
button
Click on this button to move a selected
track down in the Portable Track List
order.
Transferring tracks to the
MM-RX400 player
Before starting
• Before connecting the MM-RX400 player
to your computer, be sure to fully charge
the battery.
• Check that the internal Flash Memory or
MultiMediaCard has enough available
memory to store the transferred tracks.
You can find this information in the
Device Usage bar.
• Check that files to be transferred are not
encoded with a bit rate or sampling
frequency outside the range supported
by the MM-RX400 player. For more
information about the supported bit rates,
see page 61.
• The following actions are strictly
prohibited while transferring music files.
Doing so may cause not only the
computer to freeze up but also the
memory media to be damaged.
— Disconnecting the USB cable from
the MM-RX400 player or the
computer
— Removing the battery from the MM-
RX400 player
— Removing the MultiMediaCard from
the MM-RX400 player
1 Connect your MM-RX400 player
to your computer (page 15).
2 Turn on the player by holding the
e / s button pressed until
“CONNECT USB” appears on the
display of the MM-RX400 player.