Aiwa MM-RX400 - Manual (Page 45)

ENGLISH
45
ENGLISH
Viewing current memory
usage status of the memory
media
The Device Usage bar located on the
right pane of the Copy to Devices window
gives you color-coded representation of
current memory usage status of the
selected memory media.
• Green
The amount of memory currently being
used on the memory media
• Yellow
The amount of memory necessary for
transferring the selected tracks
• Gray
The amount of available memory
remaining after transferring the selected
tracks
• Red
The amount of memory shortage when
all the selected tracks are transferred
Deleting tracks from the
memory media
1 Click on the track that you want to
delete from the Portable Track
List.
2 Click on .
The selected track is deleted from the
memory media.
You can also right-click on the track,
then select “Remove” from the shortcut
menu.
Tip
If you want to delete all the tracks from the
memory media, you may use the “Format
Media” button.
Increasing the number of
files that can be transferred
to the MM-RX400 player
You can transfer more files to the MM-
RX400 player by selecting a bit rate lower
than that of the tracks selected for transfer.
1 Click on “Options” of the “View”
menu to open the “Options”
dialog box.
2 Click on to the right of the “Bit
Rate:” field, then select a bit rate
lower than that used to encode
the selected tracks under the
“Read CD” tab.
This causes the files to be reduced in
size, resulting in increasing the number
of files to be stored on the memory
media.