Troubleshooting, Specifications – Sony SS-M9ED User Manual

Page 14

Advertising
background image

14

GB

Additional Information

Troubleshooting

Should you encounter a problem with your speaker
system, check the following list and take the indicated
measures. If the problem persist, consult your nearest
Sony dealer.

There is no sound from the speaker system.

, Make sure all the connections have been correctly

made.

, Make sure the volume on the amplifier has been

turned up properly.

, Make sure the program source selector on the

amplifier is set to the proper source.

, Check if headphones are connected. If they are,

disconnect them.

The left and right sounds are unbalanced or
reversed.

, Make sure the plus (+) and the minus (–) terminals

on the speakers are matched to the corresponding
the plus (+) and the minus (–) terminals on the
amplifier.

, Check if the speakers and components are

connected correctly and securely.

There is hum or noise in the speaker output.

, Make sure all the connections have been correctly

made.

, Make sure none of the audio components are

positioned too close to the TV set.

, Check if the speaker cords is kept away from any

AC power cords.

The sound has suddenly stopped.

, Make sure the stripped ends of the speaker cords

do not touch each other.

, Make sure the stripped ends of the speaker cords

do not touch neighboring speaker terminal.

Specifications

Type

4-way, bass reflex (vented) system

Configuration

20 cm woofers

× 2

13 cm midrange

2.5 cm tweeter

2.5 cm super tweeter

Frequency response

26 - 100,000 Hz (±3 dB)

Impedance

4 ohm nominal; 2 ohm minimum

Maximum input power

400 watts

Minimum input power

50 watts

Maximum output

113 dB

Sensitivity

86 dB, 1 meter, 2.83 Vrms

Crossover frequencies

200 Hz, 2,000 Hz, 22,000 Hz

Dimensions (w/h/d)

Approx. 400

Ч

1,125

Ч

555 mm

Mass

Approx. 58.1 kg each

Supplied accessories

See page 5.

Design and specifications are subject to change without notice.

Advertising