Battery charging – AT&T TL7610 User Manual
Page 19
Advertising
13
Getting started
Battery charging
After installing the battery, charge the headset by placing it in
the headset base as shown below. The headset
ON/OFF light is
on when the headset is charging.
1. Insert the headset into the
headset base.
2. Push the headset downward
until the
ON/OFF light on the
headset turns on.
Insert
Push
ON/OFF light
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT191545). To obtain a replacement battery, visit our website at
www.telephones.att.com
or call
1 (800) 222-3111
. In
Canada, dial
1 (866) 288-4268
.
Advertising