AT&T TL7610 - Manual (Page 25)

19
Getting started
The neckband ring is positioned for right-ear wearing when first
purchased.
To wear the headset on your left ear:
Remove the ring from the neckband. Note the small opening in
the plastic at the place where the ring meets the neckband. Then
rotate the ring post up and through that small opening, as shown
in Figure 1.
2. Snap the ring into the small socket at the end of the left arm of the
neckband
To attach the headset to the neckband for wearing on the left or
right ear:
Remove any headset attachment currently connected to the
headset.
Insert the earpiece into the neckband ring as shown in Figure 2.
1.
1.
2.
Headset attachments
Behind-the-neckband
Figure 1
Figure 2
Ring