AT&T TL7610 - Manual (Page 48)

42
Maintenance and Troubleshooting
The batteries
do not hold a
charge. • Make sure that the headset battery is
installed and securely plugged into the
connector.
If the cordless headset is in the headset base
and the
ON/OFF light on the headset does
not come on, refer to The ON/OFF light on
the headset is off while charging in this
Troubleshooting guide.
• Charge the battery in the cordless headset
for at least 6 hours. For optimum daily
performance, return the cordless headset to
the headset base when not in use.
• You may need a new battery. Please refer to
the Battery charging section on page 13.
• Your headset might be malfunctioning.
Please refer to the Limited warranty
section on page 59 for further instructions.
•
Troubleshooting