AT&T TL7610 - Manual (Page 29)

23
Operation
Headset operation
Making a call
Answering a call on the headset
When the headset base is plugged into the
telephone wall jack (installation option 1 or 2):
Press ON/OFF on the headset.
When the headset base is connected to a multiple
line or digital business corded telephone
(installation option 3):
Lift the corded handset from the telephone cradle.
Press
ON/OFF on the headset at any time to
switch to the headset.
The handset must be away from the cradle (not
hung up) until you are ready to end your call.
NOTE: The headset base and headset do not have an
external ringer. When you receive calls, the headset earpiece
plays a ring tone. If you have telephones connected to the
same telephone line as the headset base, you can rely on
the ringers of those telephones to alert you to incoming
calls.
•
1.
2.
3.
NOTES:
For instructions on using the lifter, see the TL7000 user’s
manual. Visit
www.telephones.att.com
to
download the manual.
For instructions on using the dial pad, see the TL7601 user’s
manual. Visit
Visit
www.telephones.att.com
to
download the manual.
1.
2.