Basic operations, Playing video discs, B 14 – Sony MEX-DV1000 User Manual
Page 14: Press (open) on the main unit, Insert the disc (label side up), Close the front panel
14
Basic Operations
Playing video discs
Depending on the disc, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
To stop playback
Press (OFF).
Note
Discs in DTS format are not supported. The sound is not output if the DTS format is selected.
1
Turn on your monitor, then select the
input source on your monitor
corresponding to this unit.
2
Press (OPEN) on the main unit.
3
Insert the disc (label side up).
4
Close the front panel.
Playback starts automatically.
If playback does not start automatically, press u.
5
If the DVD menu appears, press (1)(b)/(2)(B)/(3)(V)/(4)(v) to move
the cursor, then press (6) (u) to confirm.
With the card remote commander, press the
</M/m/,/number buttons to move the cursor,
then press (ENTER) to confirm.
Z
X
Z
PL
</M/m/,
ENTER
OFF
u
u
b/B/V/v
OFF
OPEN
Z
Number
buttons