Sony MEX-DV1000 - Manual (Page 35)

35
Sound Adjustment
Adjusting the sound
characteristics
You can adjust the sound characteristics
according to your preference.
The setting items in the sound menu and
switching order are indicated below.
BAL (Balance): Adjusts the sound balance
between the left and right speakers.
FAD (Fader): Adjusts the relative level between
the front and rear speakers.
EQ7: Selects an equalizer curve from 7 music
types.
1
During playback/reception, press
(SOUND) repeatedly until the desired
setting item appears on the main unit.
2
Press </, to adjust the level or
select the desired option.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the main unit
Press the volume control dial instead of (SOUND),
rotate the volume control dial instead of pressing
</
,.
Customizing the equalizer curve
— EQ7 Tune
“CUSTOM” of EQ7 allows you to make your
own equalizer settings. You can adjust the level
of 7 different bands: 62 Hz, 157 Hz, 396 Hz,
1 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz.
1
During playback/reception, press
(SYSTEM SETUP).
The system setup item appears on the main
unit.
2
Press M/m to select “EQ7 TUNE,” then
press (ENTER).
3
Press M/m to select “CUSTOM,” then
press (ENTER).
4
Adjust the level of each frequency.
To adjust the level, press
M/m.
The level is adjustable in single steps,
between –8 and +8.
To switch the frequency, press </,.
To restore the factory-set equalizer curve,
press and hold (ENTER).
5
Press (ENTER).
The setting is complete and the display
returns to normal play/reception mode.
Note
EQ7 is not selectable in karaoke mode, or when
“SUPER AUDIO CD MODE” in visual setup (page 39)/
“SA-CD MOD” in system setup (page 42) is set to
“HQ.”
Tip
Other equalizer types are also adjustable.
With the main unit
Rotate the volume control dial instead of pressing
M/
m, press the volume control dial instead of </, or
(ENTER).
Z X Z PL
</,
SOUND
Z X Z PL
</M/m/,
ENTER
SYSTEM
SETUP