Sony TDM-NC1 - Manual (Page 36)

36
GB
1 Click [Start] – [Control Panel] – [Network Connections] in
that order (Windows XP).
Click [Start] – [Control Panel] in that order (Windows
Vista).
2 Double-click [Local Area Connection] (Windows XP).
Click [View network status and tasks] under [Network
and Internet] (Windows Vista).
3 Click [Support], then check the connection status
(Windows XP).
Click [View status] in [Network] (Windows Vista).
• Restart your computer.
• When communication is limited by firewall software
other than the OS functions, enable the following .exe
files.
For a detailed description of the setting method, see the operation
manual of the firewall software used.
• If have security software installed, confirm the security
software settings, following the instructions in the
“Security software Firewall setting guide” window.
TDM-NC1 FIREWALL CONFIGURATION TABLE
Program Allow Incoming Allow Outgoing UDP TCP
McrewServer.exe
✔ ✔
McTaskTray.exe
✔ ✔
McService.exe
✔ ✔ ✔ ✔
McFolderWatcher.exe
✔ ✔
McrewHTTPService.exe
✔ ✔ ✔
McrewUPnPService.exe
✔ ✔ ✔ ✔
McWLANSearch.exe
✔ ✔ ✔
MCMachineRegist.exe
✔ ✔ ✔ ✔
McPccdService.exe
✔ ✔