Sony TDM-NC1 - Manual (Page 37)

37
GB
There is no sound from the unit
• M-crew Server is not selected by the server selection on
the TDM-NC1 side.
• The server side unit registration is not correct.
1 Check the connection between the TDM-NC1 and your
computer.
For details on connections, see “STEP 7: Connecting the
TDM-NC1 to the network” of the Operating Instructions
provided with the TDM-NC1.
2 Turn on the AV system with DIGITAL MEDIA PORT
interface (Sony DAV series, etc.).
The TDM-NC1 is registered automatically on your computer.
The server side must also be set when performing unit registration
manually. See “Registering the TDM-NC1 on your computer
manually” (page 22).
• Make sure the TDM-NC1 is properly connected.
For details, see “STEP 7: Connecting the TDM-NC1 to the
network” of the Operating Instructions provided with the TDM-
NC1. Also check your computer’s network settings.
• Check for the task tray icon.
Refer to the startup instructions. Also refer to “The task tray
icon not present” (page 39).
• Make sure the task tray icon is lighting.
If the task tray icon is darkened like , refer to “The task
tray icon darkened” (page 39).
• Make sure the TDM-NC1 is registered in M-crew Server.
Refer to the instructions for confirming registration.