ADC Megabit Modem 700F User Manual
Page 42
Saving the Configuration
32
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Listed in the table below are the default values for the Megabit Modem in PPP over ATM mode.
Reference this table to learn the values assigned to the modem after resetting it to factory
default.
Parameter
Default Value
Parameter
Default Value
System Setup
System Mode
PPP over ATM
SNMP parameters
TFTP parameters
Enable trap sending
Not enabled
TFTP Server IP Address
192.168.0.2
Trap Server IP Address
0.0.0.0
TFTP Server Net Mask
255.255.255.0
Trap Server Net Mask
255.255.255.0
TFTP Server Path
blank field
Trap Community String
public
File Name
tiger.bin
Get Community String
public
Admin IP Address
0.0.0.0
Set Community String
private
PPP Over ATM
PPP Over ATM WAN Configuration
PPP Over ATM LAN Configuration
Service Name
blank field
IP Address
192.168.0.1
ATM VPI
0
IP Net Mask
255.255.255.0
ATM VCI
100
DHCP
Enabled
Login Name
blank field
Start DHCP IP Address
192.168.0.2
Login Password
blank field
End DHCP IP Address
192.168.1.1
Chap Host
blank field
Primary DNS
192.168.0.1
Address Translation
Enabled
Gateway
192.168.0.1
Address Assignment
Dynamic
Static NAT Entries (private, proxy, and remote)
IP Address
0.0.0.0
IP Addresses
0.0.0.0
User Assignments (for PPP WAN)
Ports
0
Service Name
blank field
Protocol
UDP
User’s IP Address
0.0.0.0