ADC Megabit Modem 700F - Manual (Page 50)

Defining Static NAT Entries
40 Megabit Modem 400F, 500L, 600F, and 700F User Manual
D
EFINING
S
TATIC
NAT E
NTRIES
Static NAT entries are used in PPP Over ATM mode. They are required only for applications
that use TCP/UDP connections initiated from the remote end (WAN). Through the
Static NAT
Table , you can map inbound traffic from a remote user to a user or a logical port on your LAN.
You can enter a maximum of 32 static NAT entries. See page 87 for more information on NAT
and an example application.
1 From the system menu, click static NAT table to open the Static NAT Table window.