Onfiguring, Configure modem parameters – ADC Megabit Modem 700F User Manual
Page 68
Configuring the LAN
58
Megabit Modem 400F, 500L, 600F, and 700F User Manual
C
ONFIGURING
THE
LAN
Devices on your local LAN attach to the modem through its LAN port. Configure parameters
for communicating between the local LAN and the modem.
Configure Modem Parameters
Access the General System page to set up modem system
parameters.
1
From the lan menu, click general to open the LAN General
window.
Information
Description
IP
Internet Protocol. Operates at layer 3 and provides addressing.
IP Address
The IP address of the modem Ethernet 10/100BASE-T LAN port.
IP Net Mask
The IP Net Mask address of the modem Ethernet 10/100BASE-T LAN port.
DHCP
Dynamic Host Configuration Protocol.Used to assign dynamic IP addresses.
Enable
Enables/Disables the modem's DHCP server.
Lease IP Address Range
Range of IP addresses to lease out.The starting address is one address higher
than the LAN IP address. The pool size is 256.
Primary DNS
IP address of the primary Domain Name System (DNS) device that translates
names into IP addresses.
Default Gateway
Default router set to the IP address of the LAN port.
lan
general