Onfiguring, Ystem, Ettings – ADC Megabit Modem 700F User Manual
Page 45
Megabit Modem 400F, 500L, 600F, and 700F User Manual
35
5
C
ONFIGURING
S
YSTEM
S
ETTINGS
Before configuring sessions with a service provider, set up system parameters for the Megabit
Modem. The following sections show the Web pages you use to configure system parameters.
Set the:
•
TFTP server IP address and network mask for performing functions such as
software upgrades on
page 36
•
SNMP parameters on
page 38
•
Static NAT Entries on
40
•
Static MAC Entries on
42
•
Static Routes on
44
•
system security on
page 40
•
system mode on
page 48
for sessions between the modem and the service provider; select
either PPP over ATM or 1483 Bridging/Routing (for Megabit Modem 700F only)
Unless specified otherwise, configuration parameters shown in this section are for example
only.