Avaya NN43170-100 - Manual (Page 61)

Using your Avaya 1165E IP Deskphone
61
Perform the following procedure to select a headset.
1. Press Prefs .
2. Select Audio .
3. Select Headset Type .
Connecting the LAN ethernet cable
Note: Your Avaya 1165E IP Deskphonesupports both AC power and
PoE options, including IEEE 802.3 standard power. To use local AC
power, you can order the optional AC adapter separately. To use
PoE, where power is delivered over the CAT5 cable, the LAN must
support PoE, and you do not need an AC adapter.
To enable full functionality of your IP Deskphone, connect your IP
Deskphone to your LAN using a CAT5e Ethernet cable. If your network is
equipped with PoE, you can power your IP Deskphone through the LAN
port.
To connect your Avaya 1165E IP Deskphone to your LAN use the
following procedure:
1. Connect one end of the supplied Ethernet cable to the back of your
IP Phone by using the RJ-45 connector marked with the
% symbol.
2. Thread the network cable through the channel marked with the %
symbol.
3. Connect the other end of the cable to your LAN Ethernet connection.
To connect your PC through your IP Deskphone use the following
procedure:
1. Connect one end of the PC Ethernet cable to your phone using the
RJ-45 connector marked with the
% symbol.
2. Thread the cable through the channel marked with the ( symbol.
3. Connect the other end of the cable to the LAN connector on the back
of your PC.