Aico Ei261DENRC - Manual (Page 28)

12. TECHNICAL SPECIFICATIONS
Operating Voltage : 230±10% VAC, 50Hz
Power : 1 Watt (60 mA)
Power on Indicator : Green Light
Sensor : Electrochemical Sensor
CO Sensitivity : Meets BS EN 50291: 2001.
Unit operates as per Table B (on page 8).
Electrical Safety : Complies with relevant sections of EN 60335-1: 1994
Electromagnetic : Complies with BS EN 50270
Compatibility
Test/Hush Button : Checks electronics and horn.
When the unit is alarming, after sensing CO, pressing the Test/Hush button will immediately stop
the horn (the red light will continue to flash). If CO is still present the red light and the horn will turn
on again after about 4 minutes. The unit can only be silenced once during a CO incident. At 300
ppm CO the unit cannot be silenced. (With interconnected units, the Hush only works on the alarm
sensing CO).
Fast CO Test Mode : Pressing the Test/Hush button also causes the unit to check for CO 4
seconds later to facilitate testing in CO gas. It gives 3 beeps and the red light
flashes to indicate the CO level if CO is sensed and then resets.
28
B16132-R0-261ENRC-UC-ENG 7/11/07 11:52 AM Page 28