Alto-Shaam FRY TECH ASF-60E - Manual (Page 41)

Electric Fryer Operation & Care Manual • 39
D E L U X E C O N T R O L O P E R A T I O N
PROGRAMMING THE CONTROL
“FILTER CNT” The filter count program allows the operator to change the number of processed fry
loads within a range of 5 to 15 before the monitor notifies the operator to service the oil/
shortening. The factory default is set at 15 loads.
THE
“FILTER”
MONITOR PROGRAM
MUST BE ACTIVATED IN ORDER TO MAKE THE
“FILTER CNT”
PROGRAM FUNCTIONAL
.
Press the Up  or Down  arrow keys to scroll until “FILTER CNT” appears in the display. Press
the Right 4 arrow key to enter the program. Display stops flashing. Press the Up 
or Down  arrow keys to until the desired number of processed loads appears in the
display. When the desired setting appears, press the Right 4 arrow key to accept the
selection. Display flashes. Press the Down  arrow key to advance the control to the
next programming function.
“MAX TIME” “MAX TIME” provides notification when the temperature of the oil is
lower than the set-point temperature. The factory set default is 3 minutes
and should not be adjusted by the operator. Press the down
 arrow
key to advance the control to the next programming function.
“HI TEMP” “HI TEMP” allows the operator to trigger an automatic fryer shut-down at a specified
oil temperature within a range of 250°F to 450°F (121°C to 232°C). This safety feature is
provided in the event the actual oil temperature exceeds the oil set-point
temperature due to equipment malfunction. The factory default is set at
450°F (232°C).
Press the Up  or Down  arrow keys to scroll until “HI TEMP” appears in the display. Press
the right 4 arrow key to enter the program. Display stops flashing. Press the Up  or
Down  arrow keys to scroll until the desired shut-down temperature appears in the
display. When the desired temperature appears, press the right 4 arrow key to accept the
selection. Press the down  arrow key to advance the control to the next
programming function.
3 : 0 0
Max Time
LoTemp
HOT
4 5 0
° F
Hi Temp
1 5
Filter Cnt