Sony SDM-S204 - Manual (Page 15)

15
GB
GAMMA menu
You can associate the picture’s color shade on the screen with the
picture’s original color shade.
x Selecting the GAMMA
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m / M buttons to select (GAMMA) and
press the OK button.
The GAMMA menu appears on the screen.
3 Press the m / M buttons to select the desired mode
and press the OK button.
ZOOM menu
The monitor is set to display the picture on the screen in full,
irrespective of the picture’s mode or resolution in the default
setting (FULL2).
You can also view the picture in its actual aspect ratio or
resolution.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m / M buttons to select (ZOOM) and
press the OK button.
The ZOOM menu appears on the screen.
3 Press the m / M buttons to select the desired mode.
• FULL2 (The default setting): The input signal is
displayed on the screen in full, irrespective of the
picture’s mode or resolution.
• FULL1: The input signal is displayed on the screen at its
actual aspect ratio. Therefore, black bands may
appear at the top and bottom of the picture,
depending on the signal.
• REAL: The input signal is displayed on the screen at its
actual resolution. Sub-1600
× 1200 signals are
displayed at the center of the screen surrounded
by a black frame.
Note
When you use 1600
× 1200 resolution signals, the above mentioned
settings are not available. The picture is displayed on the screen in full.
MENU POSITION menu
You can change the menu position if it is blocking an image on
the screen.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m / M buttons to select (MENU
POSITION) and press the OK button.
The MENU POSITION menu appears on the screen.
3 Press the m / M buttons to select the desired position
and press the OK button.
You can choose one of 9 positions where the menu will
appear.
INPUT SENSING ON/OFF menu
When you select AUTO ON in the INPUT SENSING ON/OFF
menu, the monitor automatically detects an input signal to an
input terminal, and changes the input automatically before the
monitor goes into the power saving mode.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m / M buttons to select (INPUT
SENSING ON/OFF) and press the OK button.
The INPUT SENSING menu appears on the screen.
3 Press the m / M buttons to select the desired mode
and press the OK button.
• ON: When the selected input terminal has no input
signal, or when you select an input terminal by the
INPUT button on the monitor and the terminal has
no input signal, the on-screen message appears
(page 19) and the monitor checks the input signal to
another input terminal automatically to change the
input.
When the input is changed, the selected input
terminal is displayed on the left upper of the screen.
When there is no input signal, the monitor goes into
the power saving mode automatically.
• OFF: The input is not changed automatically. Press the
INPUT button to change the input.
1 6 0 0 1 2 0 0 6 0 H z x /
E X I T
GAMMA 1
GAMMA 2
GAMMA 3
GAMMA
1 6 0 0 1 2 0 0 6 0 H z x /
F U L L 2
F U L L 1
R E A L
E X I T
Z O O M
1 6 0 0 1 2 0 0 6 0 H z x /
E X I T
M E N U P O S T O N I I
1 6 0 0 1 2 0 0 6 0 H z x /
E X I T
AU TO O N
AU TO O F F
I N P U T S E N S I N G