Sony PEG-NZ90 - Manual (Page 70)

Customizing your Sony CLIÉ™ handheld (Preferences) 70
Setting the Bluetooth™ function (for Bluetooth™ built-in models only)
Viewing/Customizing Bluetooth™ information
When the Bluetooth™ function is enabled, the following items are displayed
on the
Bluetooth Preferences screen.
Device name You can enter a name for your CLIÉ handheld. The device
name is required for each CLIÉ handheld to be identified.
You can display the name setup window by tapping the
square box.
Allow Device to be
Discovered Yes: Another Bluetooth™ compatible device detects your
CLIÉ handheld as a target Bluetooth™ compatible device.
No: Another Bluetooth™ compatible device does not
detect your CLIÉ handheld as a target Bluetooth™
compatible device.
(Default: Yes)
Allow Wake Up Yes: Even when your CLIÉ handheld is turned off,
another Bluetooth™ compatible device turns on your
CLIÉ handheld automatically and detects your CLIÉ
handheld as a target Bluetooth™ compatible device (the
Bluetooth LED blinks while this feature is enabled).
No: Another Bluetooth™ compatible device does not
detect your CLIÉ handheld as a target Bluetooth™
compatible device when your CLIÉ handheld is turned off.
(Default: No)
Device Address You can display the device address (identification number
of Bluetooth™ device) of your CLIÉ handheld.
The device address cannot be edited.