Sony DCR-PC5 User Manual
Page 30
30
Playing back a tape
To change the playback direction
Press
on the Remote Commander during playback to reverse the playback direction.
To resume normal playback, press N.
To locate a scene monitoring the picture (picture search)
Keep pressing
/m or
/M during playback. To resume normal playback,
release the button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing
/m while rewinding or
/M while advancing the tape. To
resume rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press y on the Remote Commander during playback. For slow playback in the reverse
direction, press
, then press y on the Remote Commander. To resume normal
playback, press N.
To view the picture at double speed
Press
×
2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press
, then press
×
2 on the Remote Commander. To resume
normal playback, press N.
To view the picture frame-by-frame
Press C on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press c. To resume normal playback, press
/
N
.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last 5 seconds of the recorded section plays
back and stops.
Video control buttons
Marks on your camcorder are different from those on the Remote Commander supplied
with your camcorder.
Your camcorder
:
,
,
Remote Commander : N, X, m, M
In the various playback modes
•Sound is muted.
•The previous picture may remain as a mosaic image during playback.
When the playback pause mode lasts for 5 minutes
Your camcorder automatically enters the stop mode. To resume playback, press
/
N
.
Slow playback
The slow playback can be performed smoothly on your camcorder; however, this
function does not work for an output signal from the DV IN/OUT jack.
When you play back a tape in reverse
Horizontal noise appears at the center or top and bottom of the screen. This is not a
malfunction.