Sony DCR-PC5 - Manual (Page 99)

99
“Memory Stick” operations
Using a “Memory Stick”–introduction
Using a touch panel
Your camcorder has operation buttons on the LCD screen. Press the LCD panel directly
to operate each function.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(2) Press OPEN to open the LCD panel. Operation buttons appear on the LCD
screen. You can switch the memory playback/the memory camera mode by
pressing PLAY/CAM. You can also use the Remote Commander for this
operation.
(3) Press FN. Operation buttons appear on the LCD screen.
(4) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(5) Press PAGE3 to go to PAGE3. Operation buttons appear on the LCD screen.
(6) Press a desired operation item.
Refer to relevant pages for each function.
FN
1 3~6
2
FN INDEX PLAY
MENU PLAY INDEX EXPO–
SURE
LCD
BRT PLAY INDEX
PLAY INDEX
FN INDEX CAM + –
PAGE1 PAGE2 PAGE3
PAGE1 PAGE2 PAGE3
SELF
TIMER
PAGE1 PAGE2 PAGE3 EXIT
EXIT
EXIT
POWER LOCK
VCR
MEMORY
CAMERA
OFF
LOCK
In the memory camera
mode
In the memory
camera mode In the memory
playback mode