Sony DCR-PC5 - Manual (Page 38)

38
Using the fader function
(1) When fading in [a]
In the standby mode, press FN to display PAGE1 (p. 16).
When fading out [b]
In the recording mode, press FN to display PAGE1 (p. 16).
(2) Press FADER. The screen to select the fader mode appears.
(3) Select a desired fader mode.
(4) Press
OK to return to PAGE1, and press EXIT to return to FN.
The fader indicator you selected flashes.
(5) Press START/STOP. After the fade in/out is carried out, your camcorder
automatically returns to the normal mode.
To cancel the fader function
After the fade in/out is carried out : Your camcorder automatically returns to the
normal mode.
Before the fade in/out is carried out : Before pressing START/STOP, press
OFF to
return to PAGE1, and press EXIT to return to FN.
Note
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions.
– Digital effect
– Low lux mode of PROGRAM AE (Overlap, Wipe or Dot function only)
– Super NightShot
– Tape Photo recording
1
FN
FADER
MOSC.
FADER NORM.
FADER
OFF OK
MONO–
TONE
BOUN–
CE
DOT W I PE OVER–
LAP
2~4
FADER