Sony DCR-PC5 - Manual (Page 60)

60
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame.
Before operating the Digital program editing
Step 1 Connect your camcorder to the VCR (p. 60).
Step 2 Set the VCR for operation (p. 61, 65).
Step 3 Adjust the synchronicity of your camcorder and the VCR (p. 66).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the Digital program editing function
Operation 1 Make the program (p. 68).
Operation 2 Perform Digital program editing (dubbing) (p. 70).
Step 1: Connecting the VCR
You can connect either the A/V connecting cable or the i.LINK cable (DV connecting
cable).
When you use the A/V connecting cable, connect the devices as illustrated in page 58.
When you use an i.LINK cable (DV connecting cable), connect the devices as illustrated
in page 59.
Dubbing only desired scenes
– Digital program editing
Unwanted scene Unwanted scene
Switch the order