Sony KE-42XS910 - Manual (Page 109)

107
Other Info
Other Info
Specifications
Panel System Plasma Display panel
Resolution 1024 pixels (horizontal)
× 1024 pixels (vertical)
Antenna 75 ohm external terminal for VHF/UHF
Television System NTSC, American TV Standard
Channel Coverage VHF 2-13
UHF 14-69
CATV 1-125
Power Requirements 120V, 60 Hz
Inputs/Outputs
DVI-HDTV 1 terminal, 3.3V T.M.D.S., 50 ohms
The DVI-HDTV input terminal is compliant with the EIA-861 standard and is not
intended for use with personal computers.
Video (IN) 3 total (1 on side panel) 1 Vp-p, 75 ohms unbalanced, sync negative
S Video (IN) 3 total (1 on side panel) Y: 1 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
Audio (IN) 6 total (1 on side panel) 500 mVrms (100% modulation)
Impedance: 47 kilohms
Component Video Input 2 (Y, P B , P R ) Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative;
P
B : 0.7 Vp-p, 75 ohms
P R : 0.7 Vp-p, 75 ohms
CONTROL S (IN/OUT) 1
Variable/Fixed Audio (OUT) 1 More than 408 mVrms at the maximum volume
setting (Variable)
More than 408 mVrms (Fixed)
Impedance (output): 2 kilohms
Sub woofer (OUT) 1 phono jack
RF Inputs 2
Screen Size (measured diagonally) KE-37XS910 37 inches
KE-42XS910 42 inches
Speaker Output 15W
× 2
Dimensions (W
× H × D)
KE-37XS910 1135
Ч 692 Ч 286 mm
(44 3 / 4
Ч 27 1 / 4
Ч 11 3 / 8 in)
KE-42XS910 1229
Ч 753 Ч 286 mm
(48 3 / 8
Ч 29 3 / 4
Ч 11 3 / 8 in)
Mass KE-37XS910 39.5 kg (86 lbs 1 oz)
KE-42XS910 44.5 kg (98 lbs 2 oz)
Power Consumption In Use KE-37XS910: 390 W
KE-42XS910: 430 W
In Standby Under 2.8 W
(Continued)