Sony KE-42XS910 - Manual (Page 53)

51
Remote Control
qf RESET Press to reset the settings to the factory defaults. See pages 84
and 86. Also used to clear Favorite Channels (see page 63).
qg PIC OFF Press to have the TV screen turn off. For details, see page 65.
qh DISPLAY Press once to display the current channel number, current time,
and channel label. If set, the current channel number will
display for 10 seconds.
qj 0-9, ENT Press 0-9 to select a channel; the channel changes after 2
seconds. Press ENT to change channels immediately.
qk MENU Press to display the Menu. Press again to exit from the Menu.
For details, see page 83.
ql TV/VIDEO Press repeatedly to cycle through the video equipment
connected to the TV’s video inputs.
w;
(Memory Stick)
Press to display the Memory Stick Menu. For details, see
“Using the Memory Stick Viewer” on page 67.
wa Press repeatedly to step through the available audio effect
modes: TruSurround, Simulated, and off.
For details, see “Selecting Audio Options” on page 86.
TV/SAT If SAT/CABLE FUNCTION is pressed.
Press to switch between the TV and the satellite receiver.
ws ANT Press to switch between the sources connected to the TV’s
VHF/UHF and AUX inputs.
GUIDE If SAT/CABLE FUNCTION is pressed.
Press to display the program guide of your satellite program
provider.
wd CH +/– Press to scan through channels. To scan quickly through
channels, press and hold down either
CH .
wf MTS/SAP Press repeatedly to cycle through the Multi-channel TV Sound
(MTS) options:
Stereo , Auto SAP , and Mono . For details on
each option, see page 86.
wg SLEEP Press repeatedly until the TV displays the time in minutes (15,
30, 45, 60 or 90) that you want the TV to remain on before
shutting off. To cancel Sleep Timer, press SLEEP repeatedly
until SLEEP OFF appears.
Button Description