Sony KE-42XS910 - Manual (Page 23)

21
Setup
Installing the TV
Connecting the AC
Power Cord
1
Secure the AC power plug to the AC IN jack.
2 Connect the AC power cord (supplied) to wall outlet.
Be sure to use the supplied AC power cord.
When connecting optional components, do not connect the AC
power cord to wall outlet until you have completed making all
connections.
Preventing the TV
from Falling Down After connections with antennas and other equipment are completed, be sure
to attach the supplied clamp screws to the rear of the TV, and pass a sturdy
cord or chain and attach it to a wall or pillar.
1
Remove one of the upper two screws at the rear of the TV, then attach
the supplied clamp screw to the screw hole.
2
Repeat step 1 to attach the other clamp screw.
3
Attach a sturdy cord or chain securely to each clamp screw, and attach
the cord or chain to a wall or pillar.
AC power cord
(supplied)
Clamp screw (supplied)
Rear of the TV
Attached screw