Sony KE-42XS910 - Manual (Page 28)

26
Setup
Notes on Using This Connection
Do not leave the display indication of the cable box turned on.
To Do This ... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then
use the cable box to switch channels.
Set up the TV remote control to
operate the cable box Program the remote control. See “Programming the Remote Control” on page 52.
Activate the remote control to
operate the cable box Press SAT/CABLE FUNCTION .
Prevent the accidental switching
of TV channels When using the cable box, you need the TV to stay on the channel the cable box is
set to (usually channel 3 or 4). You can use the TV’s Channel Fix feature to lock in a
specific channel. For details, see “Using the Channel Menu” on page 90.
Switch the TV’s input between
the cable box and cable
Press ANT to switch back and forth between the TV’s VHF/UHF (unscrambled
channels) and AUX (scrambled) inputs.