Sony KE-42XS910 - Manual (Page 26)

24
Setup
Cable and Antenna
Only For best results, use this connection if you:
s Have a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable company.)
s Do not have a cable box or VCR. (If you have a cable box, see pages 25
and 27. If you have a VCR, see pages 30 and 32.)
For antenna connection, use the supplied antenna cable.
When using an indoor antenna, such as rabbit-ear or dipole-
antenna, keep the antenna away from the TV. If not, noise may
appear on the screen.
Notes on Using This Connection
Cable Type Connect As Shown
Cable TV (CATV)
and Antenna
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, you cannot view antenna channels in the right dual picture
window.
VHF/UHF
TO
CONVERTER
AUX
Antenna cable
(supplied) CATV cable
(No connection to
TO COVERTER)
To Do This ... Do This ...
Switch the TV’s input between
the cable and antenna Press ANT to switch back and forth between the TV’s VHF/UHF and AUX inputs.
Receive channels using an
antenna, instead of the cable
1
Press ANT to switch to the AUX input.
2
Set the Cable option to Off . For details, see “Selecting Channel Options” on
page 90.
3
Run the Auto Setup program, as described in “Setting Up the Channel List” on
page 48.