Sony KE-42XS910 - Manual (Page 45)

43
Setup
Digital TV Set-Top
Box with
Component
Video Connectors To connect a digital TV set-top box with component video connectors
1 Use three separate component video cables to connect the set-top box’s
Y, P
B
and P
R
jacks to the Y, P
B
and P
R
jacks (HD/DVD IN) on the TV.
The Y, P B and P R jacks on your set-top box are sometimes
labeled Y, C B and C R , or Y, B-Y and R-Y. If so, connect the
cables to their matching color jacks.
2
Use an audio cable to connect the set-top box’s audio output jacks to the
TV’s HD/DVD IN AUDIO input jacks.
Notes on Using This Connection
You cannot record the signal from any equipment connected
into the Y, P
B , P R jacks.
Do not leave a still image or display indication, such as the
Electric Program Guide, displayed on the screen.
To Do This ... Do This ...
Watch the digital TV set-top box Press TV/VIDEO repeatedly to select the digital TV set-top box input (VIDEO 4 in
the illustration).
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Video Labels on page 96.
DVI-HDTV IN
DVI-HDTV R -AUDIO- L
R -AUDIO- L Y P B P R
6
4
5
HD/DVD IN
(1080i/720p/480p/480i)
Rear of TV
Audio cable
Digital TV Set-Top Box
Component video cable