Sony KE-42XS910 - Manual (Page 46)

44
Setup
Digital Satellite
Receiver with
DVI-HDTV
Connector To connect a digital Satellite Receiver with DVI-HDTV connector
1 Use a DVI-D single link cable to connect the Digital Satellite Receiver’s
DVI-HDTV connector to the TV’s DVI-HDTV connector.
The DVI-HDTV VIDEO connector does not provide audio, so
audio cables must be connected to provide sound.
2 Use an audio cable to connect the Digital Satellite Receiver’s audio
output jacks to the TV’s DVI-HDTV AUDIO jacks.
Notes on Using This Connection
Do not leave a still image or display indication, such as the Electric
Program Guide, displayed on the screen.
To Do This ... Do This ...
Watch the digital satelite receiver Press TV/VIDEO repeatedly to select the digital satellite receiver input (VIDEO 6 in
the illustration).
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Video Labels on page 96.
DVI-HDTV IN
DVI-HDTV R - - L
R -AUDIO- L Y P B P R
6
4
5
HD/DVD IN
(1080i/720p/480p/480i) ( p p )
AUTHORIZED
SERVICES ONLY
RGB OUT
P R S. VIDEO OPTICAL
OPTICAL
OUT
(1080i/720p/480p)
DVI-HDTV OUT
Rear of TV
Audio cable
Digital Satellite Receiver
DVI-D single link cable