Sony HDR-XR160 User Manual

Page 107

Advertising
background image

107

Table of C

on

ten

ts

Enjo

y U
seful F

unc
tions

Inde
x

US

(Warning indicators pertaining to

memory card formatting)

The memory card is damaged.

The memory card is not formatted correctly

(p. 90).

(Warning indicator pertaining to

incompatible memory card)

Incompatible memory card is inserted (p. 22).

 (Warning indicator pertaining to

the write-protect of the memory card)

The memory card is write-protected.

Access to the memory card was restricted on

another device.

(Warning indicator pertaining to the

external media device)

The image data base file may be damaged.

Check the data base file by touching

(MENU)  [Setup]  [ (Media Settings)]

 [Repair Img. DB F.]  the recording

medium.

The external media device is damaged.

(Warning indicator pertaining to

formatting of the external media device)

The external media device is damaged.

The external media device is not formatted

correctly.

(Warning indicator pertaining to the

flash)

Fast flashing

There is something wrong with the flash.

(Warning indicator pertaining to

camera-shake warning)

The amount of lights is not sufficient, so

camera-shake easily occurs. Use the flash

(HDR-CX360/CX360V/PJ30/PJ30V/PJ50/

PJ50V).




The camcorder is unsteady, so camera-shake

easily occurs. Hold the camcorder steady with

both hands and record the image. However,

note that the camera-shake warning indicator

does not disappear.

(Warning indicator pertaining to drop

sensor)

The drop sensor function (p. 96) is activated,

and has detected that the camcorder has

been dropped. Therefore, the camcorder is

taking steps to protect the internal hard disk.

Recording/playback may be disabled as a

result.

The drop sensor function does not guarantee

the protection of the internal hard disk under

all possible situations. Use the camcorder

under stable conditions.

(Warning indicator pertaining to

photo recording)

The recording media is full.

Photos cannot be recorded during processing.

Wait for a while, then record.

When [

REC Mode] is set to [Highest

Quality

] or [60p Quality

], you cannot

capture photos while recording movies.

Furthermore, if [

Frame Rate] is set to

[24p] (HDR-CX360/CX360V/PJ30/PJ30V/

PJ50/PJ50V), you cannot record photos while

the camcorder is in movie recording standby

mode.

Tips

You may hear a melody when some warning

indicators appear on the screen.


Advertising
This manual is related to the following products: