Sony HDR-XR160 - Manual (Page 95)

5
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
GPS Setting (HDR-CX360V/
PJ30V/PJ50V)
You can select whether the camcorder
receives or does not receive GPS signals
(p. 47).
 On
Receives GPS signals.
Off
Does not receive GPS signals.
Notes
If you set [GPS Setting] to [Off], the location
information that has previously been recorded
will be invalid. The location information will
not be recorded until triangulating is finished
successfully after you switch the [GPS Setting]
to [On].
REC Lamp (Recording lamp)
(HDR-CX360/CX360V/PJ30/
PJ30V/PJ50/PJ50V)
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
 On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.
Remote Ctrl (Remote control)
(HDR-CX360/CX360V/PJ10/
PJ30/PJ30V/PJ50/PJ50V)
 On
Select this when you use the supplied Wireless
Remote Commander (p. 125).


Off
Select this when you do not use supplied
Wireless Remote Commander.
Tips
Select [Off] when you want to prevent your
camcorder from responding to a command sent
by another remote control unit.
A. Shut Off (Auto shut off)
You can set your camcorder to turn off
automatically when you do not operate
your camcorder for more than about 5
minutes.
 On
The camcorder turns off automatically.
Off
The camcorder does not turn off
automatically.
Notes
When you connect your camcorder to a wall
outlet (wall socket), the camcorder does not
turn off automatically.
Power On By LCD
You can set the power of the camcorder to
turn on or off by opening or closing the
LCD screen panel.
 On
Turns the power on or off by opening or
closing the LCD screen panel.
Off
Does not turn the power on or off by opening
or closing the LCD screen panel.



