Sony HDR-XR160 - Manual (Page 108)

10
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Description of warning messages
If messages appear on the screen, follow the
instructions.
Recording media
Cannot recognize the internal memory.
Format and use again.
Cannot recognize HDD. Format and
use again.
The internal recording medium of the
camcorder is set differently from the default
format. Performing [Format] (p. 90) may
enable you to use your camcorder. This
will delete all data in the internal recording
medium.
Data error.
An error occurred during reading or writing
the internal recording media of the camcorder.
If the message is preceded by a GPS indicator,
there may be some trouble with the GPS
receiver. Turn on your camcorder again
(HDR-CX360V/PJ30V/PJ50V).
This may occur when you keep applying shock
on the camcorder.
Movies recorded on other devices may not be
played back.
Inconsistencies found in image database
file. Do you want to repair the image
database file?
Inconsistencies found in image database
file. Cannot record or play HD movies. Do
you want to repair the image database
file?
You cannot record or play back movies
because no movie management information
exists. If you touch [OK], new management
information is created and you can record or
play back movies.






Inconsistencies found in the image
database file. Back up and recover.
Recover, then import using the included
PC software.
Since the database information of high
definition image quality (HD) movies has
been damaged, there are inconsistencies
between the information in the database and
the information in the file. Touch [OK] to
back up the high definition image quality
(HD) movies and repair the database file.
You cannot see the backed-up movies on the
camcorder.
By connecting the camcorder to a computer
after repairing the database, you can import
backed-up high definition image quality (HD)
movies to the computer using the supplied
“PMB” software installed on the computer.
However, it is not guaranteed that all movies
can be imported to the computer.
Buffer overflow. Writing to the media was
not completed in time.
You cannot record because the drop sensor
senses a drop of the camcorder repeatedly.
If you are at risk of dropping the camcorder
constantly, set [Drop Sensor] to [Off], and you
may be able to record the image again (p. 96).
You have performed recording and erasing
operations repeatedly, or a memory card that
has been formatted by other device is used.
Copy and take data backup to other device
(such as a computer), and then format the
memory card on the camcorder (p. 90).
The size of the inserted memory card is not
sufficient for copying the movie(s). Use the
recommended memory card (p. 22).
Recovering data.
Your camcorder tries to recover data
automatically if the data writing was not
performed properly.




