Recording in mirror mode – Sony HDR-XR160 User Manual

Page 41

Advertising
background image

1

Table of C

on

ten

ts

Enjo

y U
seful F

unc
tions

Inde
x

US

Using the Video Light (HDR-CX360/
CX360V/PJ30/PJ30V)

You can use the Video Light depending on

the surrounding condition. Keep a distance

of about 0.3 m to 1.5 m (1 foot to 5 feet)

between the camcorder and the subject

when you use the video light.

Each time you press the LIGHT button, the

indicator changes as follows.
No indicator (Off) 

(Auto) 

(On)  ...

Press the LIGHT button repeatedly to

cancel the Video Light.

Notes

The Video Light generates strong light. Do not

use the Video Light directly in front of the eyes

at close range.

The battery drains quickly while using the

Video Light.

Tips

You can adjust the brightness of the Video Light

using the [Light Bright] menu (p. 86).

When the Video Light is set to

(Auto),

the video light may turn on and off repeatedly.

In such a case, press LIGHT repeatedly to select

(On).

When you take photos, the video light is turned

off and acts as the flash.

Recording in mirror mode

Open the LCD panel 90 degrees to the

camcorder (), then rotate it 180 degrees

to the lens side ().

Tips

A mirror-image of the subject appears on the

LCD screen, but the image will be normal when

recorded.

LED Video Light

Advertising
This manual is related to the following products: