Sony PCWA-C100 - Manual (Page 15)

15
Software setup
Setting up the connection environment
Perform the following procedure to set up a wireless LAN environment
with the Access Point.
1
Establish communication with Access Point (page 15).
Register the Access Point on each computer in the wireless LAN and
establish wireless communication with the Access Point. (Make
settings 1 to 4 on every computer in the wireless LAN).
2
Set the computer name and workgroup name (page 17).
Set the computer name and workgroup name for every computer used
in the wireless LAN.
3
Install the software (page 19).
Install the required software.
4
Verify communication with the Access Point (page 23).
Use Wireless Palette to verify communication with the Access Point.
5
Make the Access Point settings (page 24).
Use the Basic Setup Utility or Custom Setup Utility to make the
Access Point settings. Make these settings from any one of the
computers in the wireless LAN.
To establish communication with the Access Point
On every computer you want to connect to the wireless LAN, establish
communication with the Access Point.
Before establishing a wireless LAN environment: