Sony PCWA-C100 - Manual (Page 37)

37
Additional information
Confirm your Access Point firmware
version
If you are using an older Access Point firmware version, you must upgrade
to the latest version. Check the version and upgrade if necessary as follows.
Note
If you continue to use the old version, some of the functions will be limited. For example,
the DSL Modem (PPPoE) mode cannot be selected, and roaming cannot be used. Also, if
both the new and old versions exist on the same network, this may cause problem.
How to confirm the version
1
Establish communications with the Access Point.
2
Right-click on the Wireless Palette icon on the taskbar.
3
Click on Version from the menu that is displayed.
The latest version of Wireless Access Point is 3.83. If the version you
are using is older than this, be sure to upgrade the Access Point
firmware.
z
For details on how to upgrade, refer to the Upgrade Manual (Access Point Firmware
Upgrade Utility Help).