Sony PCWA-C100 - Manual (Page 27)

27
Wireless LAN connection
Phone mode (PCWA-A100 only)
The Setup of Phone Connection Parameters dialog box appears.
1
Enter the Account ID, Password, Password (re-enter),
Phone Number 1 and Phone Number 2 to your provider and
select or configure the options of Dialing Mode, Hangup
After and Dial Tone Detect.
z Tips
• Phone Number 2 is the alternate telephone number to use when a call to Phone
Number 1 is not completed. This is not a necessary item.
• Your Internet service provider may specify the DNS server(s). In this case, enter
data for DNS Server 1 (DNS Server 2).
• Hangup After specifies how many seconds until the telephone line is
automatically hung-up when there is no data being communicated over the
Internet. Change this setting to your requirements.
Note
Select Yes in the Dial Tone Detect if you hear a tone signal when you pick up the
receiver. If not, select No.
2
Click NEXT.
Settings made in the Setup of Phone Connection Parameters dialog box
are displayed.