Sony PCWA-C100 - Manual (Page 28)

28
3
Make sure that you have made the correct settings, then
click NEXT.
Notes are displayed regarding the Phone mode; be sure to read them
carefully.
4
Click UPLOAD.
The settings are uploaded to the Access Point. Wait for about 30
seconds until the Access Point POWER indicator lights green.
Note
The indicators on the Access Point flash while changes to the settings are being
processed.
When the confirmation dialog box appears, click FINISH to exit.
When you change the Access Point Network Name or
Encryption Key:
After changing the Access Point Network Name or Encryption Key, you
must update the computer settings and reconnect to the Access Point. For
details on how to connect to the Access Point, see “To establish
communication with the Access Point” on page 15.
Cable Modem, LAN, and Local Only
The confirmation dialog box appears.
Note
If you select Cable Modem or LAN, set up the device for an Internet connection.
1
Confirm that the Access Point connection mode is correct
and click Next.
Notes are displayed regarding the selected mode; be sure to read them
carefully.
2
Click UPLOAD.
The settings are uploaded to the Access Point. Wait until the Access
Point's POWER indicator turns green.
Note
The indicators on the Access Point flash while changes to the settings are processed.
When the confirmation dialog box appears, click FINISH to exit.