Sony PEG-UX40 - Manual (Page 125)

125
Performing the IR HotSync
®
operation
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
Performing the IR HotSync
®
operation
You can perform the IR HotSync
®
operation when you have prepared your
computer settings, CLIÉ handheld settings, and Conduit Setup.
1
Rotate the Jog Dial™ navigator to select the (HotSync)
on the CLIE 3D Launcher and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2
Tap [Local].
3
Tap V , and select [IR to a PC/Handheld].
4
Point the IR port of your CLIÉ handheld directly to the IR port
of the computer.
For best results, your computer and your CLIÉ handheld should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between
your CLIÉ handheld and the computer must be clear of obstacles.
5
Tap (HotSync).
The HotSync
®
operation starts.
A message will be displayed when the HotSync
®
operation is complete.
To restore the local HotSync settings
When performing the local HotSync
®
operation, restore the local HotSync
settings with a USB cable.
1
Connect your CLIÉ handheld to your computer with a USB
cable.
2
Click (HotSync) in the Windows task tray (Notification
area) at the bottom right of the computer window, and select
[Local USB] from the shortcut menu.