Sony PEG-UX40 - Manual (Page 128)

128
Performing the HotSync
®
operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
5
Tap [LANSync].
6
Tap [OK].
The HotSync screen is displayed again.
Performing a LANSync operation
You can perform a LANSync operation when you have prepared your
computer settings, CLIÉ handheld settings, and Conduit Setup. Turn on the
computers and start the HotSync
®
Manager.
Note
To perform a LANSync operation, both the computer connected to your CLIÉ handheld
and the computer performing the HotSync
®
operation should be set for LANSync. Also,
click (HotSync) to display the shortcut menu in the Windows task tray
(Notification area) at the bottom right of the computer window on each computer and
make sure that [Network] in the shortcut menu is selected (If not, click [Network] to
select it).
1
Rotate the Jog Dial™ navigator to select the (HotSync)
on the CLIE 3D Launcher, and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2
Tap (HotSync).
The HotSync
®
operation starts.
A message will be displayed when the HotSync
®
operation is complete.