Sony PEG-UX40 - Manual (Page 90)

Customizing your CLIÉ™ handheld (Preferences) 90
Setting the Network preferences for your provider and dial-up server
4
Tap V next to [Idle timeout:], and select one of the following
options.
• 1 Minute :
Waits one minute before dropping the connection when you open another
application that does not use the network.
• 2 Minutes :
Waits two minutes.
• 3 Minutes :
Waits three minutes.
• Never :
Keeps your PPP or SLIP connection open until you turn off your CLIÉ handheld
(or until it times out). Note that this option will be more costly than others.
5
Tap the Query DNS check box to deselect it.
6
Enter the IP address for the Primary and Secondary DNS
(Domain Naming System).
Ask your ISP or System Administrator for the correct Primary or
Secondary DNS IP numbers.
7
If you need to enter your CLIÉ handheld’s IP Address, tap
the IP Address check box and display a permanent IP
address field beneath the check box.
Normally, you do not need to enter this IP address. If you are not sure,
select Automatic and go to step 9.
8
Enter your CLIÉ handheld’s IP Address.
9
Tap [OK].