Sony PEG-UX40 - Manual (Page 86)

Customizing your CLIÉ™ handheld (Preferences) 86
Setting the Network preferences for your provider and dial-up server
Entering a password
The Password setting identifies the password you use to log into your server or
ISP. Your entry in this field determines whether your CLIÉ handheld prompts
you to enter a password each time you log into your network:
• If you do not enter a password, your CLIÉ handheld displays the word
-Prompt- in this field and asks you to enter a password during the log-in
procedure.
• If you enter a password, your CLIÉ handheld displays the word
-Assigned- in this field and does not prompt you to enter a password during
the log-in procedure.
Note
If you are concerned about security, select the -Prompt- and do not enter a password.
1
Tap the Password field on the Preferences screen for
Network.
2
Enter the password you use to log into your server.
3
Tap [OK].
The Password field changes to display the word -Assigned- .
Selecting a connection
Use the Connection setting to select the method you want to use to connect to
your Internet Service Provider (ISP) or a dial-up server.
1
Tap V next to Connection, and select [Standard Modem] on
the Preferences screen for Network.