Sony VGP-UPR1 - Manual (Page 30)

VGP-UPR1 (JP/GB/FR/ES/CT/KR) 3-296-348-02(1)
2 GB
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To avoid electrical shock, do not open
the cabinet.
Refer servicing to qualified personnel
only.

Use your product only with the AC adapter
supplied with the unit.

To disconnect it completely from the main voltage,
unplug the AC adapter.

The socket outlet shall be installed near the
equipment and shall be easily accessible.
For customers in the USA
Owner’s Record
The model number and serial number are located on
the bottom of your docking station. Record the serial
number in the space provided here. Refer to the
model and serial number when you call your Sony
Service Center.
Model No. VGP-UPR1
Serial No.
WARNING
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
Only peripherals (computer input/output devices,
terminals, printers, etc.) that comply with FCC Class
B limits, may be attached to this computer product.
Operation with non-compliant peripherals is likely to
result in interference to radio and television
reception.
All cables used to connect peripherals must be
shielded and grounded. Operation with cables,
connected to peripherals, that are not shielded and
grounded, may result in interference to radio and
television reception.
If you have any questions about this product, you can
reach the Sony Customer Information Service Center
at 1-888-476-6972 in the United States or 1-800-961-
7669 in Canada; or write to the Sony Customer
Information Service Center at 12451 Gateway Blvd,
Ft. Meyers, FL 33913, or find Sony Customer Service
on the Web at
http://www.sony.com/pcsupport.
Declaration of Conformity
Trade Name: SONY
Model No.: VGP-UPR1
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
(This phone number is for FCC-related matters
only.)
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
For customers in Canada
This Class B digital apparatus complies with
Canadian ICES-003.