Sony VGP-UPR1 - Manual (Page 34)

VGP-UPR1 (JP/GB/FR/ES/CT/KR) 3-296-348-02(1)
6 GB
2
Insert the supplied installation CD into the CD-ROM drive.
The “AutoPlay” screen will appear.

Tip

If the screen does not appear automatically, right-click “Setup.exe” of the CD-ROM, then click “Run as
administrator.”
3
Click “Run Setup.exe” in the “Install or run program” screen.
If the “User Account Control” screen appears, click “Continue.”
4
Complete the installation by following the instructions on the screen.

Tip

After the installation is complete, a screen that requests to reboot the personal computer may appear. In
this case, select “OK.”
Connecting to the personal computer
Notes
 Install the software before connecting the product (page 5).

Be sure to connect the product directly to the USB connector of the personal computer. Do not connect through a USB
hub.

When connecting to a personal computer for the first time, disconnect all devices from this product.

The product does not support Windows Aero. If the product is connected to a personal computer, it will change to the
basic user interface.

Movie playback and software that requires 3D processing are not supported on the display connected to this product.
1
Connect the plug of the supplied AC adapter to the product.
2
Insert the plug of the supplied power cord into the AC adapter.
3
Insert the plug of the supplied power cord into the wall socket.
The DC IN lamp will light up.
4
Connect the product to the USB connector of the personal computer.
A screen that requests to reboot the personal computer may appear. In this case, select “Restart
Now.”

Tip

The screen may dim for a moment after connecting the product to the personal computer. This is a normal
characteristic of setup and is not a malfunction.

You can adjust the length of the product’s USB cable by using the drain at the bottom.