Sony VGP-UPR1 - Manual (Page 40)

VGP-UPR1 (JP/GB/FR/ES/CT/KR) 3-296-348-02(1)
12 GB
Connecting headphones
You can connect headphones to the
HEADPHONES connector on this product.

About volume

Depending on sound effects, sound sources, software
types, etc., the volume of the sound may differ
although the volume setting is the same. Change the
sound settings of your personal computer according to
your usage environment.

When you want to change the sound level in the sound
settings of each device, double click the appropriate
device, or select and display the properties of the
device. For more information on sound settings, refer
to the instruction manual or the online manual of
your personal computer.
Notes

When connecting/disconnecting this product to/from
a personal computer, the output setting from the
personal computer changes. While the product is
connected to a personal computer, the sound of the
personal computer will be output through the
HEADPHONES connector on this product.

Depending on the software, the sound may not be
output through the HEADPHONES connector on this
product. In this case, exit the software, and then follow
the procedure below to allow the sound to be output
from the headphones of the connected personal
computer, etc.
1 Right-click the icon on the taskbar,
then select the playback device.
The “Sound” screen appears.
2 From the displayed playback device,
select speakers or headphones of the
personal computer, then click “Set
Default.”
This product is identified as “Speakers
C-Media….”
3 Click “OK.”
Setting is complete and the sound will output
from the personal computer.
Connecting the
microphone
You can use the microphone by connecting it to
the MIC connector of this product.
Note

While the product is connected to a personal
computer, the settings may change to activate the MIC
connector of this product. To activate the microphone
connector of the personal computer, follow the
procedure below.
1 Right-click the icon on the taskbar,
then select the recording device.
The “Sound” screen appears.
2 From the displayed recording devices,
select a device other than
“Microphone C-Media…,” and click
“Set Default.”
3 Click “OK.”
The setting change is complete, and the
microphone connector of the personal
computer will activate.

The microphone volume of this product may be set to
mute. In this case, change the volume level according
to your preference.
1 Right-click the icon on the taskbar,
then select the recording device.
The “Sound” screen appears.
2 From the displayed recording device,
select “Microphone C-Media…,” and
click “Properties.”
“Microphone Properties” appears.
3 Select the “Levels” tab and set the
microphone volume according to your
microphone.