My computer starts but a bios error appears – Sony PCG-NVR23 User Manual
Page 126
My computer starts but a BIOS error appears.
When the battery is low on power, it may not start your system properly. The message "Press <F1> to resume, <F2> to
setup" appears at the bottom of the screen. Follow these steps:
1.
Press the F2 key. The BIOS Setup menu appears.
2.
Set the date (month/day/year). Press Enter.
3.
Press the Down Arrow
key to select System Time, then set the time (hour: minute: second). Press Enter.
4.
Press the Right Arrow
key to select the Exit menu.
5.
Press the Down Arrow
key to select Get Default Values. The message "Load default configuration now?"
appears.
6.
Select Yes, and press Enter.
7.
Make sure Exit (Save Changes) is selected, and press Enter. The message "Save configuration changes and exit
now?" appears.
8.
Select Yes, and press Enter. The computer restarts.
If this occurs on a regular basis, contact Sony Computing Support (
).
Page 126