To connect to a parallel port printer – Sony PCG-NVR23 User Manual
Page 59
Advertising
To connect to a parallel port printer
1.
Locate the Printer
port on the rear panel of the computer.
2.
Plug one end of the printer cable (not supplied) into this port, and plug the opposite end of the cable into the
parallel port on your printer.
To use a printer, you may need to install the driver software that came with your printer.
Connecting a Parallel Port Printer
See the manual that came with your printer for more information on its installation and use.
If your printer stops functioning after resuming from a power saving mode, see
information.
Page 59
Advertising